Fischer Panda FPMA3007 – Generator 24 PMS, KW/kVA 20.4/24.0, 3000 RPM, Cyl. 4, 1010 x 515 x 670

Description

Fischer Panda 24 PMS Marine Diesel Generator for Sale – FPMA3007, 20.4 kW / 24 kVA

The Fischer Panda 24 PMS, listed under FPMA3007, is a marine diesel generator with a nominal output of 20.4 kW / 24 kVA, a four-cylinder engine and an operating speed of 3,000 RPM. Fischer Panda’s 2015/2016 marine brochure documents this Panda 24 PMS configuration.

Contact Marine Inboard Specialists for price, availability and a quotation for your vessel’s generator installation or replacement. Confirm the voltage, phase, controls and supplied accessories before ordering.

Request Price & Availability | View Fischer Panda Marine Brochure

Marine Power for Yachts and Service Vessels

The Panda 24 PMS can be evaluated for onboard electrical loads such as air conditioning, refrigeration, battery charging, galley equipment and pumps. Suitability depends on the combined running load, motor starting demand, electrical supply and intended operating schedule.

A load assessment should include equipment that may run together. For example, a hypothetical 17 kW running load plus a 4 kW additional load totals 21 kW, exceeding the listed 20.4 kW output before allowing for starting surges.

Send your equipment schedule and the starting-current information for the largest motors. This helps establish whether the Panda 24 PMS is appropriately sized or whether a different generator or managed starting sequence is needed.

Four-Cylinder Kubota Diesel and Marine Cooling

The manufacturer’s historical specification identifies a Kubota V1505 diesel engine, 1,498 cm³ displacement, two cooling circuits and a GFK capsule with 3D sound insulation.

For a marine installation, cooling performance depends on the complete system. Have the installer review the seawater supply, heat exchanger, exhaust arrangement and access for maintenance against the manual for the supplied generator.

Panel type, wiring harness, voltage regulation hardware and monitoring functions must be confirmed for the offered build. Include the existing panel and control-box details when requesting a replacement.

Fischer Panda FPMA3007 Technical Specifications

The following reference data comes from Fischer Panda’s 2015/2016 Panda 24 PMS brochure. The offered generator’s identification plate and documents take precedence.

Specification	Panda 24 PMS reference
Manufacturer	Fischer Panda
Product listing reference	FPMA3007
Nominal output	20.4 kW / 24.0 kVA
Engine speed	3,000 RPM
Engine	Kubota V1505 diesel
Cylinders	4
Displacement	1,498 cm³
Published 50 Hz versions	230 V single-phase; 400 V three-phase
Cooling circuits	2
Sound capsule	GFK, 3D insulation
Approximate capsule dimensions, L × W × H	1,010 × 515 × 674 mm, excluding fittings
Approximate weight, including capsule	355 kg
Voltage and phase supplied	Confirm in quotation
Panel, harness, mounts and installation accessories	Confirm in quotation

Source: Fischer Panda Marine Generators 2015/2016, Panda 24 PMS specification column.

Dimension check: The FPMA3007 listing gives 1,010 × 515 × 670 mm. Fischer Panda’s brochure and currently linked 24x datasheet give a capsule height of 674 mm. Use the drawing for the supplied unit when checking fit, with additional space for connections, mounts and servicing.

Panda 24 PMS and Current Panda 24x Documentation

Fischer Panda’s current range uses the designation Panda 24x PMS. Its published 230 V, single-phase, 50 Hz reference also lists 20.4 kW / 24 kVA at 3,000 RPM, with a Kubota V1505 engine.

The current documentation identifies xControl / fpControl, a 12 V starting system and nominal voltage regulation of ±3 V. These details should be checked against the offered Panda 24 PMS rather than assumed from the similar model name.

Download Current Panda 24x PMS Datasheet | View Manufacturer’s Linked Installation Drawing

Use these documents as references. Request the manufacturer article number, serial number and matching manual for the unit being quoted.

Understanding 20.4 kW / 24 kVA

kW measures real power, while kVA measures apparent power. At a power factor of 0.85, 24 kVA × 0.85 = 20.4 kW. This relationship does not describe engine efficiency or establish the capacity to start a particular motor.

Fischer Panda’s historical brochure also qualifies the apparent-power figures for this generator class by reference to optional starting compensation or a starting-current booster. Confirm the installed starting equipment and allowable load with the supplied documentation.

For extended daily operation, request the applicable sustained-load guidance, operating limits and maintenance schedule. A nominal output figure alone does not establish a vessel-specific continuous-duty rating.

Generator Replacement and Installation Checks

Match the electrical supply

Confirm the vessel’s voltage, frequency and phase arrangement. A 230 V single-phase system and a 400 V three-phase system require different matching checks. For three-phase installations, the installer must review phase loading as well as total demand.

Include the shore-power supply, transfer equipment, battery chargers and existing distribution arrangement in the assessment.

Match the installation space

Measure the available compartment, access opening and mounting footprint. Check space for capsule removal, filters, belts, cooling connections and exhaust routing.

For a replacement, send photographs of the current generator plate, mounting area and connections. Similar external dimensions do not establish matching mounts or a direct replacement.

Match the controls and operating requirements

Identify the current panel, harness length, starting supply and any remote-start or vessel-monitoring requirements. Confirm compatible controls and any additional interface equipment in the quotation.

State expected running hours, typical load and operating location so the offered configuration can be assessed against its documented limits.

Sound Levels and Fuel Consumption

The historical manufacturer brochure reports 55 dB(A) at 7 metres for the Panda 24 PMS. This is a published reference measurement; sound inside a vessel depends on mounting, compartment construction, exhaust routing and the surrounding installation.

Request fuel-consumption data for the specific generator and expected load. A single litres-per-hour figure would not represent every operating condition.

Compare Related Fischer Panda Generators

For a lower-output alternative, review the Fischer Panda 18 PMS Marine Generator – FPMA3006.

For a higher-output alternative, review the Fischer Panda 30 PMS Marine Generator – FPMA3008.

You can also browse the Fischer Panda Marine Generator range. Compare electrical configuration, starting capability, operating limits, installation space and package scope alongside output.

Supply Package, Warranty and Delivery

Request a quotation that identifies the generator’s condition, manufacturer reference and included components. Confirm the sound capsule, control panel, harness, mounting equipment, starting accessories, cooling and exhaust installation parts, manuals and any optional service kit.

Warranty terms should identify the warrantor, coverage period, territory and registration or commissioning requirements. Installation labour and commissioning should be listed separately where applicable.

Provide the delivery address or port, required delivery date and any import-document requirements. Confirm availability, dispatch timing, freight, taxes and delivery terms in writing.

For regulated or classed vessels, state the operating country, flag and required approvals. Request documentation for the actual generator being supplied.

Frequently Asked Questions

Does “24” mean this generator supplies 24 kW?
The listed nominal ratings are 20.4 kW and 24 kVA. They describe different electrical quantities. Size the generator using both running demand and starting requirements.

Is FPMA3007 supplied as 230 V or 400 V?
Confirm this in the quotation. Fischer Panda’s historical Panda 24 PMS brochure lists both 230 V single-phase and 400 V three-phase 50 Hz versions.

Can it start my air-conditioning system or compressor?
That requires a load assessment. Provide motor starting current, running demand, starting method and other equipment operating at the same time.

Will it replace my existing marine generator?
It can be considered after checking electrical compatibility, dimensions, mounts, cooling, exhaust and controls. Send the identification plate and installation photographs for review.

Does the price include installation equipment?
Package contents must be itemised. Ask which panel, harness, mounts, cooling parts and exhaust accessories are included, and whether installation and commissioning are separately quoted.

Are Panda 24 PMS and Panda 24x PMS identical?
Matching nominal ratings do not establish an identical build. Confirm the manufacturer article number, serial number and associated documentation before selecting parts or planning an installation.

Request a Fischer Panda 24 PMS Marine Generator Quote

Looking for a Fischer Panda FPMA3007 Generator 24 PMS for sale? Contact Marine Inboard Specialists for pricing, availability and configuration details.

Include your vessel type, required voltage and phase, equipment load schedule, largest motor starting demand, intended daily running hours and available installation space. Please also provide your billing and delivery addresses, expected purchase timing and required delivery date.

For a replacement, attach clear photographs of the existing generator plate, control panel and installation.