Description

Fischer Panda 8000i PVMV-N Diesel Inverter Generator for Sale – FPVG0102

The Fischer Panda 8000i PVMV-N is a two-cylinder diesel inverter generator for internal vehicle installation. Listed by Marine Inboard Specialists under reference FPVG0102, it is an option for owners and installers planning an electrical power system for a compatible motorhome or specialist vehicle.

Fischer Panda’s published 230V, 50Hz reference configuration delivers 6.4 kW / 8.0 kVA nominal output. Manufacturer article 0013235 uses a Kubota Z482 engine and requires an external radiator. Your quotation should identify the exact generator, matched inverter and cooling package supplied.

PVMV-N Vehicle Installation and Remote Cooling

Fischer Panda identifies PVMV-N as a configuration for installation within a vehicle. The published reference incorporates a water-cooled exhaust arrangement and requires an external radiator. Radiator placement and airflow therefore form part of the complete system design.

This arrangement can be assessed where the vehicle has suitable space for the generator compartment, radiator, inverter, fuel connections and exhaust route. Check access for servicing as well as the equipment’s installed dimensions.

If your project is a boat installation, state that at enquiry stage so the appropriate marine configuration can be assessed. The intended application, cooling system and exhaust arrangement need to be established before selecting the assembly.

Variable-Speed Inverter Technology

The iSeries uses an inverter to regulate the AC supply while engine speed changes with electrical demand. Fischer Panda’s vehicle iSeries brochure describes a sine-wave output intended for applications including computers and communications equipment.

For buyers, this means matching the complete generating system to the required voltage, frequency and loads. The reference model supplies 230V, single-phase, 50Hz power. Specify any different electrical requirement when requesting a quotation.

Include the generator inverter, controls and cooling auxiliaries when comparing packages. Their installation requirements affect both the available space and total project cost.

Technical Specifications

The figures below describe Fischer Panda’s Panda 8000i PVMV-N, article 0013235. Sources are the manufacturer’s model datasheet and 2026 vehicle generator brochure.

Specification	Published reference
Product model	Fischer Panda 8000i PVMV-N
Marine Inboard Specialists reference	FPVG0102
Manufacturer article number	0013235
Application	Vehicle, internal installation
Generator technology	Variable-speed iSeries inverter system
Nominal electrical output	6.4 kW / 8.0 kVA
Output voltage	230V AC
Frequency / phases	50Hz / single-phase
Reference power factor	0.8
Engine manufacturer / model	Kubota Z482
Fuel / cylinders	Diesel / two cylinders
Displacement	479 cm³
Engine-speed reference	2,450–2,950 RPM
Starter system	12V electric
Control system	iControl
Cooling	Water-cooled with external radiator
Sound enclosure	GFK 4DS
Approximate capsule dimensions	760 × 515 × 609 mm, L × W × H, excluding fittings
Approximate generator weight including capsule	192 kg
Published sound level	52 dB(A) at 7 metres
Inverter and radiator	Identify the supplied models and installation requirements in the quotation

The FPVG0102 listing quotes 6.0 kW / 8.0 kVA and 2,200–2,800 RPM. The manufacturer’s reference above gives 6.4 kW / 8.0 kVA and 2,450–2,950 RPM. Obtain the offered assembly’s rating documentation when ordering so output and operating speed are established for the actual unit.

Nominal Output and Continuous Load Planning

8.0 kVA is an apparent-power rating; it does not mean 8.0 kW. At a power factor of 0.8, 8.0 kVA corresponds to 6.4 kW. Assess both the real-power demand and apparent-power requirement of the connected equipment.

Fischer Panda’s September 2019 vehicle iSeries brochure lists 5.8 kW continuous output for the 8000i PVMV-N. It also gives the earlier 2,200–2,800 RPM range. Use those figures as historical references and obtain the continuous rating applicable to the offered assembly.

For an illustrative load calculation, a 2.0 kW heater, a charger drawing 1.5 kW and other equipment consuming 1.0 kW total 4.5 kW. Cooling fans and any additional loads must also be counted. Compressor and pump starting requirements need a separate assessment of the generating system’s surge capability.

Is This the Right Replacement Generator?

Use three checks when assessing a Fischer Panda vehicle generator replacement: match the electrical demand, match the cooling package and match the installation.

Match the Electrical Demand

Provide the required voltage and frequency, typical simultaneous loads, expected daily running hours and details of equipment with high starting demand.

For a replacement, include the existing generator, inverter and control-panel identification. Have your installer establish the suitability of any wiring, monitoring equipment or remote-start controls proposed for reuse.

Match the Cooling Package

Provide the existing radiator model, mounting location, fan supply voltage and cooling-hose arrangement. State the expected operating environment, including whether the vehicle will work in hot conditions.

Have the installer assess radiator capacity and airflow for the proposed layout. If the previous generator overheated, include an assessment of the cause in the replacement plan.

Match the Installation

Provide the vehicle make, model and year, available compartment dimensions and photographs of the mounting area. Include the exhaust route, fuel connections, radiator location and access openings.

The 760 × 515 × 609 mm capsule dimensions exclude fittings. Allow additional room for hoses, cables, mounting equipment, capsule removal and servicing.

Radiator, Inverter and Scope of Supply

Request an itemized quotation identifying the generator assembly, capsule, matched inverter, control panel, harness, mountings and installation accessories included.

The manufacturer lists roof-mounted and side or underneath radiator options with different electrical supplies. Establish the selected radiator, fan controls, coolant plumbing and exhaust components for the vehicle layout.

The 2019 iSeries brochure identifies a PMGi 8000 inverter for this generator. Confirm the inverter version, dimensions and mounting requirements supplied with your package. Include radiator and inverter weights when planning the complete installation.

Installation labour, electrical protection, commissioning and replacement vehicle-side components should also be identified when comparing total costs.

Installation Drawing and Sound Levels

Fischer Panda provides a reference drawing for article 0013235. Your installer should use the drawing revision applicable to the supplied assembly when checking connections and mounting positions.

The published reference sound level is 52 dB(A) at 7 metres. Sound experienced inside or near the vehicle also depends on mountings, structural vibration, radiator fans, exhaust routing and compartment construction. Discuss these factors when locating equipment near sleeping or working areas.

Compare Related Fischer Panda Vehicle Generators

For a smaller installation, compare the Fischer Panda 5000i PVMV-N – FPVG0101. For greater electrical demand, explore the Fischer Panda 15000i PVMV-N – FPVG0103.

Compare continuous output, starting capability, electrical configuration, cooling requirements and package contents. Browse our Fischer Panda generators and specify whether your project is a vehicle or marine installation.

Fischer Panda 8000i PVMV-N Price, Delivery and Warranty

Request a Fischer Panda 8000i PVMV-N price for the configuration and destination required. The quotation should identify the manufacturer article number, equipment condition, package contents, availability, dispatch estimate, freight charges and applicable taxes.

Obtain the warranty terms for the actual unit, including the warrantor, coverage period, territory and registration or commissioning requirements. Provide the operating country and required emissions documentation so the offered assembly can be assessed for the intended application.

Frequently Asked Questions

Is the 8000i PVMV-N a vehicle or marine generator?

Fischer Panda classifies this reference as a vehicle generator for internal installation. State a boat application separately so the appropriate marine configuration can be assessed.

Is its nominal output 6.0 kW or 6.4 kW?

The manufacturer’s published reference is 6.4 kW / 8.0 kVA. The listing quotes 6.0 kW; obtain written confirmation of the supplied unit’s rating.

What is the continuous output?

The September 2019 brochure lists 5.8 kW continuous. Confirm the applicable continuous rating for the assembly offered.

Does it operate at a fixed speed?

No. It uses variable-speed operation. The manufacturer reference gives 2,450–2,950 RPM, while earlier literature gives 2,200–2,800 RPM.

Does the installation require an external radiator?

Yes. The published PVMV-N reference requires an external radiator. Establish the selected radiator and associated equipment in the quotation.

Does the capsule size include the complete system?

No. Allow separate space for the radiator and inverter, plus connections, mountings and maintenance access around the generator.

Request Your Fischer Panda 8000i PVMV-N Quotation

For a Fischer Panda 8000i PVMV-N diesel inverter generator for sale, contact Marine Inboard Specialists and quote FPVG0102.

Include your application, vehicle details, required electrical supply, expected loads, installation space and radiator requirements. State how soon you want to purchase, your required delivery date, and your billing and delivery addresses. For a replacement, attach photographs of the existing generator plate, inverter, radiator and installation.