Description

Fischer Panda 5000i PVK-UK Generator for Sale – FPVG0301

The Fischer Panda 5000i PVK-UK, listed under reference FPVG0301, is a single-cylinder diesel vehicle generator with integrated radiator cooling. The manufacturer’s identified reference supplies 230 V, 50 Hz, single-phase AC power, with a published nominal output of 4.0 kW / 5.0 kVA.

Contact Marine Inboard Specialists for a quotation covering the generator, matched electrical equipment, controls and installation accessories required for your vehicle.

Reference specification: The supplied listing states 2,800 RPM and 1,270 × 439 × 440 mm. The manufacturer’s current model page publishes 2,450–3,000 RPM, while its 2026 vehicle brochure lists a 1,204 × 445 × 460 mm capsule. Confirm the offered assembly and applicable drawing before ordering.

Request Price & Availability | View Manufacturer Specifications

Integrated Cooling for External Vehicle Installation

PVK-UK identifies an external vehicle generator arrangement with an integrated radiator. It combines the generator and cooling system within an external mounting package, reducing the need to find a separate radiator location on the vehicle.

Installation planning still needs to accommodate cooling airflow, exhaust routing, structural support and servicing. An integrated radiator must have an effective air intake and discharge path when the vehicle is parked as well as during its intended operating conditions.

This differs from PVK-U, which requires a separate radiator, and PVMV-N, which is intended for internal vehicle installation with remote cooling. Select the arrangement around the available space and installation design.

Variable-Speed iSeries Operation

The 5000i PVK-UK belongs to Fischer Panda’s iSeries range. The manufacturer publishes a 2,450–3,000 RPM operating-speed range for article 0013322. The single 2,800 RPM figure in the supplied listing should therefore be checked against the offered unit’s documentation.

For the quotation, identify the matched inverter, iControl panel and connecting cables, together with their installation locations. Confirm compatibility before retaining electrical equipment from an older generator.

The integrated radiator describes the cooling arrangement. Use the itemised quotation to establish the complete electrical and installation package.

Technical Specifications

The reference figures below follow the manufacturer’s 5000i PVK-UK, article 0013322, together with its 2026 vehicle generator brochure. Match the supplied assembly to its applicable documentation.

Specification	Published reference
Product listing reference	FPVG0301
Generator model	Fischer Panda 5000i PVK-UK
Manufacturer reference article	0013322
Generator family	iSeries – Perfect Power
Application	External vehicle installation
Nominal electrical output	4.0 kW / 5.0 kVA
Reference AC voltage / frequency	230 V / 50 Hz
Phase configuration	Single-phase
Published reference engine speed	Variable, 2,450–3,000 RPM
Fuel type	Diesel
Engine manufacturer / model	Kubota EA300
Cylinders / displacement	1 / 309 cm³
Starter system	12 V
Control system	iControl
Published power factor	0.80
Capsule designation	MPL 4DS
Brochure capsule dimensions, L × W × H	1,204 × 445 × 460 mm, excluding fittings
Published generator weight with capsule	Approximately 176 kg
Published sound level	54 dB(A) at 7 metres
Cooling arrangement	Integrated radiator
Continuous operating rating	Confirm for the supplied assembly and operating conditions

Sources: Fischer Panda model specifications and 2026 vehicle generator brochure. Allow additional space for connections, mounting hardware and servicing.

The 176 kg reference figure includes the generator capsule. Confirm the complete installed weight, including associated electrical equipment, supports and fluids, for the package being offered.

Understanding 4.0 kW and 5.0 kVA

4.0 kW describes nominal real power; 5.0 kVA describes apparent power. These published figures correspond to the manufacturer’s stated 0.80 power factor.

Assess both electrical limits alongside the starting demand and power factor of connected equipment. For extended running periods, obtain the applicable continuous-output rating and operating conditions for the actual generator and electrical package.

As an illustrative case, a 2.0 kW heater and a charger drawing 2.0 kW from the AC supply already total 4.0 kW before cooling accessories or other appliances. Load sequencing and charger settings may therefore matter as much as the generator’s headline rating.

Is This the Right Generator for Your Vehicle?

Use three checks when planning a new installation or replacement: match the electrical demand, match the mounting space and match the cooling airflow.

Match the Electrical Demand

Provide the equipment that must operate simultaneously, its AC input requirements and the intended daily running hours. Include starting-current information for compressors, pumps and other motors where available.

For a replacement, send the existing generator’s model, serial number, output, voltage, frequency and phase. Have your installer assess electrical protection, shore-power changeover, charger integration and control compatibility.

Match the Mounting Space

Measure the available chassis space, ground clearance and maintenance access. Allow room for hose connections, wiring, cover removal and any separately mounted inverter or control equipment.

The manufacturer’s 5000i PVK-UK reference capsule drawing illustrates the assembly and mounting arrangement. Obtain the revision applicable to the offered unit before finalising structural supports or vehicle modifications.

Match the Cooling Airflow

Have the installer assess radiator intake and discharge clearances, nearby obstructions and the risk of hot air returning to the intake. Include the vehicle’s intended ambient conditions and whether surrounding panels affect airflow.

Provide photographs showing the proposed mounting area and its surroundings. If replacing a generator that overheated, assess the original airflow and cooling problem before commissioning the replacement.

Generator Package and Scope of Supply

Request an itemised quotation identifying the generator assembly, integrated cooling equipment, matched inverter, control panel, cables, fuel connections, mounting components and exhaust installation parts included.

Specify required cable lengths and any service spares. Identify existing components you intend to reuse so compatibility can be checked by model and part number.

Separate installation labour, vehicle modifications, commissioning and documentation from the equipment price. This establishes the complete vehicle generator replacement cost and helps you compare quotations accurately.

Follow the operating and installation instructions applicable to the supplied generator, inverter and controls. Fischer Panda publishes a 2014 reference operating manual for the 5000i PVK-UK; confirm the appropriate documentation for the actual unit.

Compare Related Fischer Panda Generators

For a separate-radiator arrangement, compare the Fischer Panda FPVG0201 5000i PVK-U. Its cooling installation and overall space requirements differ from the integrated PVK-UK package.

For greater electrical demand with integrated cooling, explore the Fischer Panda FPVG0302 8000i PVK-UK. Compare the applicable output rating, installed dimensions and complete supply package.

Fischer Panda 5000i PVK-UK Price, Delivery and Warranty

Request a Fischer Panda 5000i PVK-UK price for your required package and delivery destination. The quotation should identify the actual manufacturer article, equipment condition, supplied accessories, current availability, dispatch estimate, freight charges and applicable taxes.

Obtain written warranty terms for the actual generator supplied, including the warrantor, coverage period, territory and any registration or commissioning requirements.

For international orders, specify the destination country and required emissions or conformity documentation so the offer addresses the appropriate configuration and supply documents.

Frequently Asked Questions

Is the Fischer Panda 5000i PVK-UK a 5 kW generator?

Its published nominal output is 4.0 kW / 5.0 kVA. The kVA figure should not be treated as its real-power rating.

Does the PVK-UK have an integrated radiator?

Yes. The PVK-UK configuration incorporates radiator cooling within the external generator package. Installation still needs suitable cooling airflow.

Does it operate at a fixed 2,800 RPM?

It is an iSeries variable-speed model. The current manufacturer reference publishes 2,450–3,000 RPM; confirm the operating range applicable to the offered assembly.

Which dimensions should I use for installation?

The 2026 manufacturer brochure lists 1,204 × 445 × 460 mm, excluding fittings. Use the drawing and installation clearances applicable to the actual unit supplied.

Is this a marine generator configuration?

The identified reference is for vehicle installation. If the project is a boat installation, specify the application so a suitable marine configuration can be assessed.

Does the quotation include the inverter and controls?

The itemised quotation establishes the scope. Confirm the matched inverter, control panel, cables, mounts and installation accessories required for a complete package.

Request Your Fischer Panda FPVG0301 Quotation

For a Fischer Panda 5000i PVK-UK generator for sale, contact Marine Inboard Specialists with reference FPVG0301.

Include your vehicle type, electrical load schedule, daily operating hours, available mounting space and proposed installation photographs. State how soon you want to purchase, your required delivery date, and your billing and delivery addresses.

For replacements, attach clear photographs of the existing generator plate, inverter, control panel and mounting arrangement.