Fischer Panda FPMA3003 – Generator 8000x PMS, KW/kVA 6.8/8.0, 3000 RPM, Cyl. 2, 595 x 440 x 590

Description

Fischer Panda 8000x PMS Marine Generator for Sale – FPMA3003

The Fischer Panda 8000x PMS is a fixed-speed diesel marine generator with a published nominal output of 6.8 kW / 8.0 kVA. Its 230 V, 50 Hz, single-phase configuration is an option for boats requiring onboard AC power for charging, refrigeration, galley appliances and appropriately matched motor-driven equipment.

Request pricing from Marine Inboard Specialists under listing reference FPMA3003. For a new installation or replacement, match the generator to the boat’s electrical demand, available space and operating schedule before ordering.

Request Price & Availability | Download Fischer Panda Datasheet

Fixed-Speed xSeries Power with a Kubota Diesel Engine

The 8000x belongs to Fischer Panda’s xSeries – Compact Power range and has a published nominal engine speed of 3,000 RPM. It combines a two-cylinder Kubota Z482 diesel engine, water cooling and a GFK 3D sound-insulation capsule.

The manufacturer publishes electronically regulated voltage with a ±3 V tolerance. When selecting equipment, check voltage and frequency compatibility together with starting demand and the generator’s applicable load limits.

Fischer Panda 8000x PMS Technical Specifications

The figures below are published on Fischer Panda’s current product page and in its linked English datasheet. The product page identifies manufacturer reference 0038901, while the datasheet identifies 0028281. Confirm the reference and equipment configuration actually supplied.

Specification	Published details
Product model	Fischer Panda 8000x PMS
Listing reference	FPMA3003
Current manufacturer product-page reference	0038901
Linked English datasheet reference	0028281
Generator range	xSeries – Compact Power
Nominal electrical output	6.8 kW / 8.0 kVA
Output voltage and frequency	230 V / 50 Hz
Phase configuration	Single-phase
Nominal engine speed	3,000 RPM
Engine manufacturer and model	Kubota Z482
Fuel and cylinder count	Diesel / two cylinders
Engine displacement	479 cm³
Starting system	12 V
Cooling	Water-cooled marine configuration
Sound-insulation capsule	GFK 3D
Published generator weight	164 kg
Published capsule dimensions, L × W × H	595 × 445 × 555 mm, excluding fittings
Published power factor	0.85

Sources: Fischer Panda 8000x PMS product page and English datasheet.

The listing gives 595 × 440 × 590 mm, which differs from the manufacturer figures above. Obtain the applicable assembly drawing for the supplied unit before approving installation space, mounts or service clearances.

Understanding 6.8 kW and 8.0 kVA

6.8 kW measures nominal real power; 8.0 kVA measures nominal apparent power. At the published power factor of 0.85, 8.0 kVA corresponds to 6.8 kW. Use the stated ratings when comparing quotations; the “8000x” model name does not establish an 8 kW real-power output.

For extended running, provide average demand and daily operating hours. The manufacturer’s published manual discusses sustained-load recommendations, so confirm the applicable operating guidance and continuous capability for the actual build offered.

The 8000x/10000x xControl marine generator manual is dated February 2018. Match documentation to the supplied generator and control version.

Is the 8000x Suitable for Your Boat’s Electrical Loads?

Prepare a load schedule covering equipment that may run together. Include battery-charger AC input, refrigeration, cooking appliances, water heating and any air-conditioning compressors, pumps or watermakers.

For example, a hypothetical 2.0 kW water heater, 2.2 kW kettle, 1.5 kW charger input and 1.4 kW of other equipment total 7.1 kW. That exceeds the published 6.8 kW nominal output before allowing for motor starting.

Provide starting-current data for compressors and pumps. A suitable running load alone does not establish that the generator can start an appliance while other equipment is operating.

Replacement and Installation Compatibility

For a replacement project, use three checks: match the electrical supply, match the installation and match the controls.

Match the Electrical Supply

Provide the existing generator model, serial number, voltage, frequency and phase configuration. This description covers the referenced 230 V / 50 Hz single-phase configuration.

Ask a marine electrician to assess source switching, circuit protection, earthing and compatibility with any inverter/charger.

Match the Installation

Send compartment dimensions and photographs showing the access opening, mounting base and surrounding equipment. Allow for capsule removal, routine maintenance, connections and a suitable lifting route.

Have the installer assess diesel supply and return, starting-battery connections, cooling-water intake, exhaust routing and ventilation. Include the generator’s position relative to the waterline and, for sailing boats, the effect of heel.

If the previous generator suffered overheating or water ingress, investigate the cause during replacement planning.

Match the Controls

The current manufacturer product page identifies fpControl, while the linked datasheet lists xControl / fpControl. Confirm the panel, harness and controller version supplied before deciding to reuse existing equipment.

Identify any required automatic-start, monitoring or network functions in the quotation, including the equipment needed to support them.

Sound Insulation and Service Access

The cited datasheet publishes 52 dB(A) at 7 metres. This is a manufacturer sound figure, rather than a measurement inside your boat’s cabin.

Mounting, exhaust routing, compartment construction and distance from living areas affect the installed result. Ask the installer to consider noise transmission while preserving access to filters, the cooling-water pump and routine service points.

Scope of Supply and Documentation

The itemized quotation should identify the generator, sound enclosure, control package, wiring and supplied documentation. Establish separately whether mounts, fuel-system components, cooling and exhaust accessories, starter battery, installation labour and commissioning are included.

Use the supplied manufacturer article number and serial number when ordering service parts. Obtain the appropriate generator and engine manuals, wiring information and parts references with the package.

Operating Area and Emissions Requirements

For its current 0038901 listing, Fischer Panda marks IMO MARPOL, EPA marine, EU 2016/1628 and China 20891-2014 entries as supported. Obtain the applicable certificates and emissions identification for the exact unit offered.

Include the destination country, intended waterways and any survey or classification requirements with the enquiry so the required build and documentation can be established.

Compare Related Fischer Panda Generators

For a larger fixed-speed option, explore the Fischer Panda 10000x PMS – FPMA3015. To assess a variable-speed alternative, compare the Fischer Panda 8000i PMS – FPMA1002.

Browse the Fischer Panda marine generator range and compare real-power output, operating duty, starting requirements, controls and installation scope.

Fischer Panda 8000x Price, Delivery and Warranty

Request a Fischer Panda 8000x price for the configuration and delivery destination you need. The written quotation should identify the manufacturer reference, condition, included equipment, current availability, dispatch estimate, freight charges and applicable taxes.

Obtain the warranty terms for the actual unit supplied, including the warrantor, coverage period, territory and any registration or commissioning requirements.

Frequently Asked Questions

Is the Fischer Panda 8000x an 8 kW generator?

Its published nominal output is 6.8 kW / 8.0 kVA. These are different measures of electrical power.

Does it operate at a fixed speed?

Yes. The referenced 50 Hz configuration has a published nominal engine speed of 3,000 RPM.

What engine does it use?

The published specification identifies a Kubota Z482, two-cylinder diesel engine with 479 cm³ displacement.

Can it run my boat’s air conditioning?

This requires assessment of the compressor’s starting demand, running load and other simultaneous equipment. Provide the appliance specifications before selecting the generator.

Can I reuse my existing control panel?

Confirm compatibility with the supplied controller and harness. Published documents identify different control versions, so the model name alone does not establish compatibility.

Will it fit the space occupied by my existing generator?

Compare the supplied assembly drawing, mounting arrangement and service clearances with the available space. The listing and manufacturer publish different enclosure dimensions.

Request Your Fischer Panda FPMA3003 Quotation

For a Fischer Panda 8000x PMS marine generator for sale, contact Marine Inboard Specialists with your boat make, model and year, electrical load schedule, intended running hours and required package.

For replacements, attach the existing generator plate and installation photographs. Include how soon you want to purchase, plus your billing and delivery addresses, so the quotation can cover the correct equipment and destination.