Fischer Panda FPMA3004 – Generator 12000x PMS, KW/kVA 10.2/12.0, 3000 RPM, Cyl. 3, 705 x 445 x 590

Description

Fischer Panda 12000x PMS Marine Generator for Sale – FPMA3004

The Fischer Panda 12000x PMS is a fixed-speed diesel marine generator with a published nominal output of 10.2 kW / 12.0 kVA. The referenced 230 V, 50 Hz, single-phase configuration can be assessed for yachts and compatible boats requiring onboard AC power for charging, accommodation systems and appropriately matched appliances.

Request pricing from Marine Inboard Specialists under listing reference FPMA3004. For a replacement or new installation, establish the electrical configuration, load schedule and complete package before ordering.

Request Price & Availability | Download Fischer Panda Datasheet

Fixed-Speed xSeries Power with a Kubota D722 Engine

The 12000x belongs to Fischer Panda’s xSeries – Compact Power range. It combines a three-cylinder Kubota D722 diesel engine, water cooling and a GFK 3D sound-insulation capsule, with a published nominal speed of 3,000 RPM.

Fischer Panda specifies electronically regulated voltage with a ±3 V tolerance. Before selecting equipment, check its voltage, frequency, running load and starting demand against the supplied generator’s requirements.

Fischer Panda 12000x PMS Technical Specifications

Fischer Panda’s current product page identifies reference 0038904; its linked English datasheet identifies 0024660. Both publish the core figures below. Confirm the article number and equipment configuration supplied in the quotation.

Specification	Published details
Product model	Fischer Panda 12000x PMS
Listing reference	FPMA3004
Current manufacturer product-page reference	0038904
Linked English datasheet reference	0024660
Generator range	xSeries – Compact Power
Nominal electrical output	10.2 kW / 12.0 kVA
Output voltage and frequency	230 V / 50 Hz
Phase configuration	Single-phase
Nominal engine speed	3,000 RPM
Engine manufacturer and model	Kubota D722
Fuel and cylinder count	Diesel / three cylinders
Engine displacement	719 cm³
Starting system	12 V
Cooling	Water-cooled marine configuration
Sound-insulation capsule	GFK 3D
Published generator weight	195 kg
Capsule dimensions, L × W × H	705 × 450 × 590 mm, excluding fittings
Published power factor	0.85

Sources: Fischer Panda 12000x PMS product page and English datasheet.

The listing gives 705 × 445 × 590 mm, while the manufacturer publishes a 450 mm width. Obtain the applicable assembly drawing for the supplied unit before approving mounts, access openings or installation clearances.

Understanding 10.2 kW, 12 kVA and Operating Duty

kW measures real power; kVA measures apparent power. At the published power factor of 0.85, 12.0 kVA corresponds to 10.2 kW. Use these figures when comparing offers; the model name should not be interpreted as 12 kW of real-power output.

For extended running, provide average demand, daily operating hours and expected peak loads. Obtain the applicable sustained-output rating and operating guidance for the actual build offered.

The manufacturer bases published performance on operation at 100 metres above sea level and 20°C. Have the supplier assess the intended installation conditions when confirming available output.

Electrical Load Planning Before Purchase

Prepare a load schedule covering equipment that may operate together: battery chargers, refrigeration, water heating, galley appliances and any compressors, pumps or watermakers.

For example, a hypothetical 7.5 kW background load plus a 3.0 kW water heater totals 10.5 kW. That exceeds the published 10.2 kW nominal output before allowing for motor starting. Load scheduling or a larger generator would need assessment.

Use the charger’s AC input requirement in the calculation. For motor-driven equipment, provide starting-current data alongside running consumption.

Confirm the 230 V or 400 V Configuration

Fischer Panda publishes a separate 12000x-400V PMS model with three-phase output. The version described here is 230 V single-phase.

Specify voltage, frequency and phase in the enquiry and quotation. A matching model family and power rating alone do not establish compatibility with the boat’s electrical distribution.

Replacement and Installation Compatibility

For a replacement, use three checks: match the electrical system, match the installation and match the controls.

Match the Electrical System

Provide the existing generator’s model, serial number, voltage, frequency and phase. Include the load schedule, shore-power switching arrangement and any inverter/charger.

Ask a marine electrician to assess motor starting, source switching, protection and earthing against the supplied package’s requirements.

Match the Installation

Send compartment measurements and photographs showing the mounting base, access route and surrounding equipment. Allow for service access, capsule removal, connections and a suitable lifting arrangement.

Have the installer assess fuel supply and return, starting-battery connections, cooling-water intake, exhaust routing and ventilation. Include the installation’s position relative to the waterline and, for sailing boats, the effect of heel.

Match the Controls

Published documentation identifies xControl / fpControl. Confirm the controller, panel and harness version supplied before deciding to retain existing equipment.

Identify required remote-start, automatic-start or monitoring functions in the quotation, including any necessary interfaces.

Sound Insulation and Scope of Supply

The datasheet publishes 53 dB(A) at 7 metres. This is a manufacturer sound figure; installed noise depends on mounting, exhaust routing, compartment construction and proximity to accommodation.

An itemized quotation should identify the generator, enclosure, controls, supplied wiring and documentation. Establish separately whether mounts, installation kits, fuel-system components, cooling and exhaust accessories, starter battery, installation labour and commissioning are included.

Obtain the applicable generator and engine manuals, wiring information and assembly drawing. Use the supplied article number and serial number when ordering service parts.

Operating Area and Emissions Documentation

Fischer Panda’s current product page for reference 0038904 marks IMO MARPOL, EPA marine, EU 2016/1628 and China 20891-2014 entries as supported. Obtain the applicable certification and emissions identification for the exact unit offered.

Include the destination country, intended waterways and any survey or classification requirements with the enquiry.

Compare Related Fischer Panda xSeries Generators

For lower electrical demand, compare the Fischer Panda 10000x PMS – FPMA3015. For greater nominal output, explore the Fischer Panda 15000x PMS – FPMA3005.

Browse the Fischer Panda marine generator range and compare output, operating duty, electrical configuration, starting demand and installation scope.

Fischer Panda 12000x Price, Delivery and Warranty

Request a Fischer Panda 12000x price for the package and delivery destination you need. The written quotation should identify the manufacturer reference, condition, included equipment, availability, dispatch estimate, freight charges and applicable taxes.

Obtain the warranty terms for the supplied unit, including the warrantor, coverage period, territory and registration or commissioning requirements. Include installation and boat-side modifications when comparing complete project costs.

Frequently Asked Questions

Is the Fischer Panda 12000x a 12 kW generator?

Its published nominal output is 10.2 kW / 12.0 kVA. kW and kVA measure different aspects of electrical power.

Is this version single-phase or three-phase?

This description covers the 230 V / 50 Hz single-phase configuration. A separate 400 V three-phase version is published.

What engine does it use?

The referenced specification identifies a Kubota D722, three-cylinder diesel engine with 719 cm³ displacement.

Does it run at a fixed speed?

Yes. Its published nominal engine speed is 3,000 RPM.

Can it run my boat’s air conditioning?

This requires assessment of compressor starting demand, running consumption and other simultaneous loads. Provide the appliance specifications before selecting the generator.

Will it replace my existing marine generator?

It can be assessed where electrical output, operating duty, controls and installation requirements match. Send the existing identification plate and installation photographs.

Request Your Fischer Panda FPMA3004 Quotation

For a Fischer Panda 12000x PMS marine generator for sale, contact Marine Inboard Specialists with your boat make, model and year, electrical requirements, load schedule, daily running hours and required package.

For replacements, attach the existing generator plate and installation photographs. Include how soon you want to purchase, plus your billing and delivery addresses, so the quotation can cover the correct equipment and destination.