Fischer Panda FPMA1007 -Generator 25i – 230V PMS, KW/kVA 20.0 / 25.0, 2200-2800 RPM, Cyl. 3, 840 x 563 x 664

Description

Fischer Panda 25i 230V PMS Marine Generator – FPMA1007

The Fischer Panda 25i 230V PMS is a single-phase marine diesel generator with a published nominal output of 20.0 kW / 25.0 kVA. Available through Marine Inboard Specialists under listing reference FPMA1007, the documented configuration supplies 230 V, 50 Hz AC power.

For yacht owners assessing greater onboard electrical capacity, the 25i combines variable-speed generation with a sound-insulated enclosure. It can be considered for installations with substantial air-conditioning, galley, battery-charging, watermaking, and other compatible loads. Selection depends on simultaneous demand, operating hours, and installation requirements.

Variable-Speed Generation with Inverter Regulation

The Panda 25i belongs to Fischer Panda’s iSeries marine inverter generator range. Engine speed responds to electrical demand, while the matching inverter regulates the AC output. This allows the engine to adjust to changing loads while maintaining the specified supply frequency.

The generating set, inverter, and controls form a matched system. Include all three when comparing quotations and planning the machinery-space layout.

Technical Specifications

The reference figures below follow Fischer Panda’s Panda 25i – 230 V PMS datasheet, manufacturer article 0013283. Match the offered assembly to its applicable documentation.

Specification	Details
Product model	Fischer Panda 25i – 230 V PMS
Listing reference	FPMA1007
Manufacturer reference in cited datasheet	0013283
Application	Marine auxiliary electrical generation
Published nominal output	20.0 kW / 25.0 kVA
Nominal AC voltage	230 V
Frequency / phase	50 Hz / single-phase
Published reference engine speed	Variable, 2,450–3,000 RPM
Fuel	Diesel
Engine	Kubota V1505
Cylinders / displacement	Four cylinders / 1,498 cm³
Starting system	12 V electric
Control system	Fischer Panda iControl
Published voltage tolerance	±3%
Published power factor	0.80
Sound-insulation capsule	GFK 3D
Datasheet capsule dimensions, excluding fittings	840 × 520 × 664 mm
Published generator weight with capsule	230 kg
Published separate inverter weight	19 kg

Download the Fischer Panda 25i 230V PMS datasheet.

Dimensions, engine speed, and equipment can differ between versions. Use the offered unit’s identification and applicable drawing to establish the actual installation requirements.

Understanding 20 kW, 25 kVA and Sustained Loading

The 20 kW rating describes real electrical power, while 25 kVA describes apparent power. Both limits matter when assessing motors, compressors, and other onboard equipment.

Fischer Panda’s Panda 25i system manual, revision R04.4 dated 25 July 2025, recommends limiting loads sustained over several hours to 80% of nominal output for engine longevity. For the documented 20 kW model, that corresponds to 16 kW, calculated as 20 × 0.80. Treat this as operating guidance and obtain the applicable continuous rating and installation conditions for the unit supplied.

The same manual addresses carbon buildup during prolonged light-load operation. Generator selection should therefore consider normal demand as well as peak demand. Variable-speed control does not remove the need to follow the supplied operating guidance.

Is the Panda 25i Right for Your Vessel?

Provide a load list showing what must operate together: air-conditioning compressors, cooking appliances, water heaters, battery chargers, watermakers, refrigeration, and pumps.

Identify each motor’s starting current and starting method. A compressor starting while galley appliances and battery chargers are already operating can create a different demand from the normal running total.

Include any planned additions to the vessel. Your installer can then assess sustained demand, starting loads, and load-management options before selecting the generator package.

Match the Electrical System, Space and Installation

Match the Electrical System

The documented version supplies 230 V single-phase power. Confirm voltage, frequency, and phase against the vessel’s distribution system.

When replacing a smaller generator, have your marine electrician assess the switchboard, cables, changeover equipment, electrical protection, and inverter/charger settings for the proposed output. Existing distribution equipment must be suitable for the replacement package.

Match the Available Space

Allow room for the generator, separate inverter, connections, enclosure removal, and servicing. Check the access route, lifting arrangements, mounting structure, and installed weight.

The manufacturer’s Panda 25i capsule drawing shows the documented assembly and connections. Obtain the drawing applicable to the offered unit.

The sound enclosure helps control machinery noise. Mounting, structural vibration, exhaust routing, and proximity to accommodation also affect sound experienced onboard.

Match the Cooling, Exhaust and Controls

Have your installer review seawater supply, freshwater cooling, wet-exhaust routing, waterlock placement, and inverter cooling requirements. Confirm the control panel, connecting cables, and any automatic-start interface needed.

Fischer Panda’s Panda 25i installation and operating manual covers the generating set and associated systems. Use the documentation applicable to the supplied build.

Generator Package and Scope of Supply

Request an itemized quotation identifying the generating set, sound enclosure, matched single-phase inverter, control panel, connecting cables, fuel pump, mounting equipment, and documentation included.

Specify cooling and exhaust installation parts, additional cable lengths, starting battery, and service spares required. Identify installation labour and commissioning separately to compare the complete marine generator installation cost.

For a replacement, send the existing generator plate and compartment photographs. If the previous unit failed after overheating or water entry, resolve the cause before fitting its replacement.

Compare Related Fischer Panda Generators

For lower single-phase demand, compare the Fischer Panda 15000i 230V PMS – FPMA1004. If your vessel needs three-phase power, explore the Fischer Panda 25i 400V PMS – FPMA1008.

Browse our Fischer Panda marine generator range to compare capacity, electrical configuration, installation requirements, and package scope.

Fischer Panda 25i 230V PMS Price, Delivery and Warranty

Request a Fischer Panda 25i 230V PMS price for your required package and destination. The written quotation should identify the exact model and condition, included equipment, current availability, dispatch estimate, freight charges, and applicable taxes.

Obtain the warranty terms for the actual generator supplied, including the warrantor, coverage period, territory, registration, and commissioning requirements. Include the operating country and any required emissions or classification documentation with your enquiry.

Frequently Asked Questions

Is the Panda 25i a 25 kW generator?

Its published nominal output is 20.0 kW / 25.0 kVA. Kilowatts and kilovolt-amperes describe different aspects of electrical capacity.

Does the referenced version have three cylinders?

The cited manufacturer datasheet specifies a four-cylinder Kubota V1505 diesel engine, with 1,498 cm³ displacement.

Is the FPMA1007 single-phase?

This description covers the 230 V, 50 Hz, single-phase version. The 400 V three-phase version is a separate option.

Can it supply 20 kW throughout the day?

Assess sustained demand against the applicable rating and manual. The cited manual recommends an 80% nominal-load target for operation over several hours, equivalent to 16 kW for this reference model.

Can it replace a smaller marine generator?

Potentially. Output, distribution equipment, mounting, space, cooling, exhaust, and controls require assessment before replacement.

Does the quoted package include the inverter and installation parts?

The itemized quotation establishes the scope. Request the matched inverter and specify the installation accessories required.

Request Your Fischer Panda 25i 230V PMS Quotation

For a Fischer Panda 25i 230V marine generator for sale, contact Marine Inboard Specialists and quote FPMA1007. Include your vessel type, electrical load list, required voltage and frequency, daily operating hours, and package requirements. For a replacement, attach the existing generator plate and installation photographs. Tell us how soon you want to purchase and provide your billing and delivery addresses for an official quotation.