Description

Fischer Panda 8000i PVK-U Generator for Sale – FPVG0202

The Fischer Panda 8000i PVK-U is a two-cylinder diesel generator designed for external installation on a vehicle chassis, with a separate radiator. Fischer Panda’s current manufacturer reference lists 6.4 kW / 8.0 kVA nominal output, supplying 230 V, 50 Hz, single-phase AC power.

Contact Marine Inboard Specialists about product reference FPVG0202 for a quotation covering the generator, cooling equipment, controls and installation accessories required for your project.

Specification note: The supplied FPVG0202 listing states 6.0 kW / 8.0 kVA and 2,200–2,800 RPM. Fischer Panda’s current model documentation lists 6.4 kW / 8.0 kVA and 2,450–2,950 RPM. Confirm the applicable manufacturer article number and specification when ordering.

Request Price & Availability | Download Manufacturer Datasheet

External Vehicle Power with a Separate Radiator

The PVK-U configuration places the generator outside the vehicle’s occupied space. Fischer Panda describes a metal enclosure, chassis mounting provisions and an integrated water-cooled silencer, with a separate radiator providing cooling. This arrangement can be considered for specialist trailers, expedition vehicles and mobile work applications where space inside the vehicle is limited.

The installation designation matters when comparing quotations. PVK-U uses a separate radiator; PVK-UK combines external installation with an integrated radiator; PVMV-N is intended for internal vehicle installation with a separate radiator. These arrangements have different space and installation requirements.

For a boat installation, specify that requirement at enquiry stage so the appropriate marine generator configuration can be selected.

Variable-Speed Generation and Electrical Loads

Fischer Panda’s iSeries uses inverter technology and engine speed that varies with electrical demand. Its UK 8000i PVK-U specification describes pure sine-wave AC output. Equipment compatibility still depends on the connected load, starting demand and the electrical installation.

Understanding 6.4 kW and 8.0 kVA

The manufacturer lists a 0.80 power factor, corresponding to 8.0 kVA × 0.80 = 6.4 kW. kW describes real power, while kVA describes apparent power; both limits matter when assessing equipment loads.

As an illustrative calculation, a 2.0 kW heater, a battery charger drawing 2.5 kW from the AC supply and 1.0 kW of other equipment total 5.5 kW before radiator fans, additional accessories or starting surges. That total alone does not establish suitability. Motor starting current, load sequencing and the applicable operating rating must also be checked.

The linked model datasheet labels its output nominal and does not provide a separate continuous-output figure. Request the applicable continuous rating and operating conditions for the offered assembly, particularly for long daily running periods.

Fischer Panda FPVG0202 Technical Specifications

The following table uses Fischer Panda’s current 8000i PVK-U reference, article 0005554. Confirm that the offered FPVG0202 assembly corresponds to this reference before purchase.

Specification	Manufacturer reference
Product reference	FPVG0202
Generator model	Fischer Panda 8000i PVK-U
Manufacturer article number	0005554
Installation	External vehicle chassis; separate radiator
Nominal electrical output	6.4 kW / 8.0 kVA
Output voltage / frequency	230 V AC / 50 Hz
Phase configuration	Single-phase
Rated power factor	0.80
Published engine speed	2,450–2,950 RPM
Diesel engine	Kubota Z482
Cylinders / displacement	2 / 479 cm³
Starter system	12 V
Generator control	iControl
Capsule designation	MPL 4DS
Capsule dimensions, L × W × H	780 × 530 × 620 mm, excluding fittings
Published weight with capsule	Approximately 220 kg
Published sound level	52 dB(A) at 7 metres

Technical sources: Fischer Panda model datasheet and 2026 vehicle generator brochure. Capsule measurements exclude installation allowances; radiator and other separately mounted equipment require additional space and weight allowance.

Three Checks Before Selecting the Installation

1. Chassis Support, Clearance and Service Access

Measure the available mounting area and assess ground clearance, suspension movement, road exposure and access for servicing. The capsule dimensions should be treated as the equipment envelope, with additional room for connections, mounting hardware and maintenance.

For a replacement, provide photographs of the existing mounting arrangement and generator identification plate. Compare the proposed assembly against the applicable drawing revision, including mounting points and connection positions.

The manufacturer’s reference drawing identifies the Fischer Panda 8000i PVK-U assembly. Request confirmation that it applies to the unit being quoted.

2. Radiator Position and Fan Supply

Identify a suitable radiator location with sufficient airflow and access for cleaning. Cooling selection should account for ambient temperature, hose routing and the vehicle’s intended operating conditions.

Fischer Panda lists compatible radiator options with 24 V DC or 230 V AC fan supplies. Confirm the selected radiator and its electrical requirements independently of the generator’s 12 V starter system.

3. Electrical Demand and Operating Schedule

Provide an equipment schedule showing AC input power, starting current where available, operating hours and loads that run simultaneously. Include battery chargers, air conditioning, heaters and cooling accessories.

For an existing vehicle, also identify the shore-power connection, inverter/charger and changeover arrangement. Have the complete electrical design assessed by the installer before treating the generator as a direct replacement.

Scope of Supply and Installation Equipment

Request an itemised quotation distinguishing the generator assembly from the associated inverter equipment, control panel, wiring, radiator, fan controls, fuel connections, mounting components and exhaust installation parts.

State which existing components you intend to reuse. Compatibility should be confirmed by model and part number, especially for an older inverter, control panel or cooling package.

The quotation should also identify manuals, drawings, commissioning requirements and any installation work included. Manufacturer reference photographs or accessory lists should not be treated as confirmation of the quoted supply package.

Compare Related Fischer Panda Generators

For a project requiring greater output, consider the Fischer Panda FPVG0203 15000i PVK-U, listed at 12.0 kW / 15.0 kVA. Confirm its voltage, dimensions and cooling requirements separately.

If the proposed mounting location is inside the vehicle, compare the Fischer Panda FPVG0102 8000i PVMV-N. Its installation arrangement differs from the external PVK-U version.

Price, Delivery and Warranty

Contact Marine Inboard Specialists for current price, availability and delivery options. Include the destination, required accessories and installation details so the quotation addresses the complete project.

Before ordering, obtain written confirmation of equipment condition, manufacturer identification, scope of supply, delivery terms and applicable warranty. Ask whether commissioning, registration or installation approval is required for warranty eligibility.

For international orders, state the destination country and any required emissions or conformity documentation. The documentation supplied must match the actual engine and generator configuration.

Frequently Asked Questions

Is the 8000i PVK-U a marine generator?

Fischer Panda 8000i PVK-U classifies this version as a vehicle generator for external chassis installation. For a vessel, request a suitable marine configuration and installation assessment.

Why does the listing show 6.0 kW while the manufacturer lists 6.4 kW?

The supplied FPVG0202 description and current manufacturer reference differ. Confirm the offered assembly’s article number, rating plate and datasheet before comparing output or placing an order.

Does the PVK-U have an integrated radiator?

The Fischer Panda 8000i PVK-U requires a separate radiator. The PVK-UK designation identifies the external configuration with an integrated radiator. Confirm radiator inclusion in the quotation.

Does it run at a fixed engine speed?

The iSeries design uses variable engine speed according to demand. The supplied listing and current manufacturer reference give different speed ranges, so request the specification applicable to the offered unit.

How much installation space does it need?

The current reference capsule measures 780 × 530 × 620 mm, excluding fittings. Allow additional space for connections, servicing, mounting hardware and the separate radiator.

Does the price include installation and accessories?

Request an itemised quotation. Confirm the radiator, inverter equipment, controls, wiring, mounting parts, commissioning and installation separately.

Request a Fischer Panda FPVG0202 Quote

Looking for a Fischer Panda 8000i PVK-U generator for sale? Contact Marine Inboard Specialists with reference FPVG0202.

Include the vehicle type, mounting-space measurements, electrical load schedule, daily operating hours, radiator location and destination requirements. State your intended purchase timing, required delivery date, and billing and delivery addresses.

For a replacement, attach clear photographs of the existing generator plate, control panel, radiator and installation.